Fiberglass Rebar

Fiberglass fittings from the manufacturer, the description

The fiber reinforcement bars Glass Composite is one of the most popular and modern materials in the world that have received wide popularity in many parts of the world. Such popularity is due to the fact that the glass fiber has many advantages over the metal steel.

The installations of steel bars in construction works require much expense in time and effort due to the weight of the heavy steel.

In addition, it is prone to corrosion, which could eventually lead to premature failure of the concrete structure. In turn, the use of fiberglass rods – lighter and chemical resistance material (immunize the etching of all types) in construction is more profitable

Equivalence between the steel bars and the fiberglass resistance standpoint bars.

Given the very high performance of fiber rods compared to steel you find below the table of equivalence to use in calculating your structures

Comparative characteristics of fiberglass reinforcement

The performance and features like durability, light weight and corrosion resistance of composite rebar is the strengths of the popularity among builders and professionals.

However, many people, who are used to working with in conventional metal steel bars, often skeptical that the glass fiber or basalt fiber can fully replace metal steel. These fears arise because of a lack of information about the capabilities and characteristics of composite materials.

To fill this gap, we will provide a comparative description of the metal and composite connectors for the most necessary construction parameters.

properties*  steel rebar  stainless steel rebar  [email protected]
ultimate tensile strength ftk (N/mm²) 550 550

> 1000

characteristic value tensile strength fyk (N/mm²)  500 500 no yielding
design value tensile strength fyd (N/mm²)  435 435 445
strain at Ultimate Limit State  2.18 ‰ 2.72 ‰ 7.4 ‰
tension modulus of elasticity  200,000 160,000 60,000
design value bond strength fbd ≤ C40/50  acc. EC 2 acc. EC 2 acc. EC 2
design value bond strength fbd > C40/50  acc. EC 2 acc. EC 2 3.7
concrete cover (min.)  acc. EC 2 ds + 10 mm ds + 10 mm
density g (g/cm³)  7.85 7.85 2.2
thermal conductivity (W/mK)  60 15 < 0.5
coefficient of thermal expansion (1/K)  0.8 – 1.2 x 10-5  0.8 – 1.6 x 10-5 0.6 x 10-5 (axial) 2.2 x 10-5 (radial)
specific resistance (μΩcm)  1 – 2 x 10-5  7.2 x 10-5  > 1012
magnetism  yes very little no

Economical

Benefit from 30% at ravnozamene metal reinforcement on composite

Corrosion

100% does not rust. Water-resistant, not subject to corrosion and does not cause destruction of concrete

Without welding

Composite reinforcement knit wire or plastic tightening the fixings

Any length

On request, unlike metal 6 or 12 meters

Durability

Reduces cost of transportation and handling operations, and facilitates the execution of works on the subject

Low weight

Reduces cost of transportation and handling operations, and facilitates the execution of works on the subject

Thermal conductivity

100 times lower than that of steel, which significantly reduces heat los

Heat resistance

From -70 to +200 ° C does not change its operating characteristics

Strength

Composite rebar 2-2.5 times stronger than steel

Dielectric

It does not conduct electric current, electrical

Environmentally friendly

It does not emit harmful and toxic substances. It complies with all European standards. Do not harm nature

Radioprozrachny

It does not create the screen and interfere with radio waves, cellular and wi-fi

The main applications of composite reinforcement

Building (foundation)

Unique features, such as the strength of the non-metallic fittings, made of composite material, are an alternative to fittings of metal.

The most common type is the reinforcement of fiberglass, followed by basalt rebar, both types have been successfully used in the construction.

Basalt and composite rebar used for construction of buildings and structures for various purposes.

read more

Characteristics of fiberglass and basalt fittings, making them suitable for industrial, road, civil engineering, bridges, various piers, docks, which are in use are exposed to aggressive media and corrosion.

Composite valves allows to increase the life of plants by 2-3 times as compared with the metal reinforcement. Through the application of the valve is less than the diameter of the can significantly reduce the cost of construction works, and thanks to the absence of corrosion increases the shelf life of products, there is a reduction or even disappearance of repairs.

Road construction

Asphalt in the CIS countries is the primary building material for road construction.

Asphalt coating wears out quickly, as a result, we are dealing with the occurrence of potholes, coating cracks, pits formation caused by temperature fluctuations, heavy load traffic and partial displacement of soil. …

read more

The low strength of asphalt pavement leads to a decrease in durability and performance.

To solve this problem, you can, by means of the reinforcement of asphalt pavement by means of a fiberglass mesh reinforcement. The problem of occurrence of the pits, potholes and soil displacement, more of us will not be disturbed. Since tensile coating strength becomes much higher, and the horizontal load is distributed over a large surface area.

Composite mesh well established and under the threat of non-standard asphalt pavement deformation due to its strength and corrosion resistance.

Laying composite mesh to create asphalt coating has been used for more than 20 years, all over the world. Threefold increase in the service life of asphalt pavement, provides a significant economic interest of large construction companies.

Reinforcement of foundations of residential and industrial buildings

Marine and coastal structures

Concrete parking

read more

If you face the choice of material for the reinforcement of industrial flooring, you should familiarize yourself with the characteristics of the composite reinforcement. The material is highly demanded and do not unreasonably.

Metal structures – a relic of the past, the composite material has a much more significant number of advantages, allowing to save a considerable amount of time and money.

 The material is able to withstand heavy loads, with a smaller diameter of the rod, fiberglass is impervious to the corrosive environment, are not exposed to the external environment when cracks occur, reliable and durable.

Acquisition of composite reinforcement in the bay, further reducing costs, due to the absence of extra segments. Handling is straightforward, thanks to the compact valve placement.

read more

Composite rebar is no exception when using the material in the construction of offshore structures and embankments.

River and port facilities are often built using reinforced concrete structures, because of their availability. However, since all these structures are located near the water or directly in it, comes into play “humidity” and hence corrosion of metal structures and inevitable destruction of only a matter of time. Furthermore, the design should be floating.

When choosing the material for the reinforcement of fall on a composite reinforcement, the problem disappears. Characteristics of fiberglass, such as lightness and resistance to corrosion, allows you to extend the design service and significantly save on costly repairs in the future.

Pontoons, FRP, last longer, withstand high loads and does not require special care, and the construction itself ensures good buoyancy, by winning by weight.

read more

The construction of parking and parking in most cases, it’s expensive and has a lot of “gotchas.” De-icing agents very aggressive effect on the coating and the concrete is very hygroscopic. After contact with the valve reagents data constitutes “layer” of the rust. Which in turn has a high coefficient of expansion, it “pushes” the concrete reinforcement rods fall freely into the cavity and become loose.

Valves made from fiberglass does not react with aggressive chemicals. What makes a grid of fiberglass – quite promising choice. Despite the heavy workload, fiberglass is better – since their elastic properties, it can be bent. This material has proven itself in the construction of parking lots and parking areas.

The US, Europe and India are already widely used this technology. Savings and time-tested quality leaves no chance metallic counterparts.

Railway sleepers

Agriculture

Bank protection

read more

The last few no fiberglass rebar are actively used in the construction of railway sleepers, platforms and platforms. The material is well established and is in high demand. One of the main advantages of composites – fire resistance. Durability and ease, the ideal ratio for comfortable transportation of the material, the construction of rail enclosures and trays made of fiberglass with ribs, for the outflow of water from the railroad tracks.

 Resistance to corrosion allows using composite rebar for the construction of platforms and sites, in conditions of high humidity and moisture. Using this material, you eliminate repair work from the list of costs, far and long. The set of unique properties of fiberglass, provides the ultimate in durability and structural life of most structures. The market of railway transport is always demanding to reduce the cost, combined with high quality materials.

Turning to the group of companies CBI, you are guaranteed to implement all your wishes and will save a weighty amount of money.

read more

Composite rebar is actively used in agriculture. Use this material is quite comfortable and easy, and the reliability and strength of the product, greatly facilitate your work. Various livestock structures built using composite profiles, will give significant acceleration in the construction, will save you from having to paint and frequent repair designs. The composite is ideal for the production of greenhouses and barns, as compared to similar structures made of metallic materials.

GRP has a low thermal conductivity while retaining a hangar or a greenhouse at the desired temperature in significant savings. In agriculture, not rarely use pultruded profile for building poles and fences. Barns, fences, fences, etc. Design of composite reinforcement, can be made in any color.

read more

From year to year, there is an increase in demand for cottage construction projects, the construction of facilities in the coastal areas. The coastal area dictates the rules at construction sites. The first with what we face – is the erosion of shores. The process of soil erosion of an ongoing process and the everyday, the damage during construction, it is worth considering.

Events on bank protection can help protect the soil from erosion and erosion. In conducting these works, we can not do without fiberglass reinforcement as the standard metal reinforcements will not give the proper result. Their properties vary much. Composite rebar has high corrosion resistance and is not subject to rust. Valves made from fiberglass, quite a budget option.

When on bank protection measures is clearly can be seen, considering the factor that the work is usually carried out on a sufficiently vast area that requires a large amount of building material. In such cases, the purchase of a fiberglass reinforcement CBI the group companies will significantly save the project budget.

Reinforcing walls

Building bridges

The floors in the house

read more

New technologies are gradually conquering the construction market. In particular, this can be said about the reinforcement of the walls and ceilings – an important and responsible process in the construction of facilities. And construction companies increasingly prefer composite materials.

Through the use of a composite reinforcement manages provide structural strength that can withstand high voltage and possible other adverse external factors for a long time.

read more

Deterioration of Bridge Deck – a key issue in the field of bridge construction. Pavement concrete wears significantly faster than any other material, because of the harmful effects of chemical agents used to prevent icing roads, inclement weather and traffic load increasing density of roads. The main problem of such a coating, the formation of cracks in the stack and the subsequent bundle due to corrosion of the material.

To prevent these situations, associated with the destruction of steel reinforcement should be replaced with another material resistant to corrosion. The polymer fittings, repeatedly and very successfully used for the reinforcement of concrete decks and other bridge structures, well-proven.

The use of a composite reinforcement, for reinforcement of the bridge deck, extends floor life and allows you to save a lot of money.

read more

Fittings polymer composite is used in residential, private and industrial construction, construction of industrial buildings and public facilities.

It is used when creating concrete structures, repair work, in the restoration of the brick and concrete surfaces, to perform masonry walls with flexible coupling, in the construction of bulk floors.

Buy composite reinforcement and use it as a cottage construction – cost-effective solution for both individuals and for the construction companies.

Composite rebar in landscape design

Underground Construction

Chemical structures

read more

Composite rebar is not limited to the sphere of construction, this material is used widely in landscape design. In the scenery of the estate land or home designers prefer reinforcement of fiberglass, due to its decorative qualities and variety of forms. Using a plastic reinforcement in the construction of water slides and pools, we can count on the absence of corrosion and rot.

The shape of the valve can be set in the manufacture, how it will look like, it depends only on your imagination. Ordering fiberglass reinforcement directly from the manufacturer Arkoprom, you can embody all the most daring ideas on landscape design of your object.

Decorative slides, waterfalls and blocks for landscaping, you can create a composite reinforcement. Glass can also be used for reinforcement of concrete, decorative designs.

It all depends on your imagination and the unique properties of composite reinforcement will allow to realize the most courageous decisions.

read more

Valves made from fiberglass has become much in demand during the construction of the largest, the world’s subways, located in Europe and Asia.

Under the conditions of absolute humidity and an abundance of constant vibration, the use of composite reinforcement – the most successful option. GRP good job of corrosion and the load, and the appearance of cracks in the concrete, due to vibration, moisture has penetrated inside, do not cause any damage, the design does not lose its load-bearing capacity. The ease and flexibility of fiberglass reinforcement, significantly simplify the work with concrete in cramped conditions underground.

Transportation fittings, manufactured in coils on the 100m. Cut material can be directly on the job site. That in turn allows you to save on transportation of fiberglass reinforcement.

read more

Valves made from fiberglass has a wide range of properties, allowing the use of this material in the construction of chemical plants. Resistance to aggressive agents with a wide gradation of temperatures and pressures, once again confirms the indispensability of the composite in the chemical industry.

Fiberglass reinforcement is ideal for the construction of pipes, tanks, reactors and other types of equipment, working in conditions of corrosion from exposure to hazardous chemicals.

One of the most common ways to use the composite in the chemical industry – creating lining, resistant to corrosion and chemicals. This connection provides the maximum protection of metal and concrete structures.

Metal structures, in turn, can not cope with the task in full fiberglass losing almost all respects. In the construction of facilities of the chemical industry, the error can not be, the use of composite reinforcement, reasonable choice and very beneficial in terms of cost, especially in the long term.

Properties of FRP reinforcement

Fiberglass reinforcement is a product formed from the glass fibers connected to thethermosetting resins. Its main feature – is the ease of mass ratio per unit volume is only2g / mm³. To work with this material much easier and more cost-effective than with metal fittings. It takes much less cost for transportation and directly at the reinforcement.

In addition, thanks to fiberglass is resistant to corrosion, such fittings protects the concrete from premature failure, thus extending the life of the structure service. Fiberglass armature reacts to changes in temperature is similar to concrete, which also favorably affects the strength of a reinforced structure. fiberglass strength as compared with metal – in excess of about three times.

Thus heat conduction rate is 100 times lower than the thermal conductivity of the steel reinforcement component. Therefore, design, GRP, not frozen (do not form “cold joints”) and the building constructed with the use of this material will be warmer than the building in which basis laid metal reinforcements.

This property allows the fiberglass to reduce heating costs, so this material is widely used in the construction of modern energy efficient buildings.

All construction and repair organizations will be interested to know that fiberglass extremely durable material, which allows for 80 years after installation to do without additional repair work. This good composite rebar for the foundation.

Fiberglass fitting found its application in many fields of industry, construction, public utilities:

  • in construction it is used in the construction of residential, public and industrial facilities as a base for the foundation, floors, beams, as well as device seysmoustoichivyh zones;
  • in road repair works fittings used in the regeneration of embankments, roadway, in the construction of bridges and road barriers. It is resistant to anti-icing reagents may therefore be applied in all cold regions.

Fiberglass reinforcement is an ideal basis for concrete and masonry structures. It is used when creating poles for power lines and lighting in the construction of road, sidewalk and fence boards, as well as device sleepers on the tracks.

Fiberglass is applicable in building structures such as the solid foundation and foam. It is also widely used in creating structures that should have a high resistance to chemicals, such as:

  • the construction of storage facilities for chemical waste and components;
  • the regeneration of sewage, water supply, irrigation systems;
  • in the construction of port facilities and the strengthening of the coastlines.

Despite the uniqueness of the product, which is acceptable fiberglass rebar price is affordable, and material for the building organizations, and individuals. Its cost is 40-50% lower than the cost of steel reinforcement, which can significantly reduce costs and thus improve the quality of constructed facilities. In general, composite rebar can be called one of the most reliable and efficient construction materials of our time.

Product form fiberglass reinforcement

This fixture is made of straight strands of glass or basalt fibers (respectively ASP and BPO), which are collected in a bun, impregnated with thermosetting resin binder, otformovyvayutsya, exposed to heat (polymerization) and cooled. The result is a solid rod of high strength, according to test results at 3 times the tensile strength of the steel, and the weight ratio of equal strength in less than 9 times.

The standard is made in the form of rods of any length, on request. With a diameter of 8 mm inclusive can be manufactured in the form of coils (skeins) containing valves 100 meters. Overall dimensions of the bay: height – up to 8 cm in diameter – up to 1 meter.

With a diameter of 10 mm and 12 mm can be manufactured in the form of coils (skeins) have a length of 50 meters. Overall dimensions of the bay: height – up to 5 cm in diameter – up to 1.5 meters.

In agreement with the customer is possible to manufacture the rods and coils of any length. It can be made with a smooth, construction, periodic profile:

  • ASP ABP-periodic profile is used instead of steel reinforcement Class A-III (A-400);
  • TSA-ABP smooth profile is used instead of steel reinforcement Class A-I (A-240).

Composite rebar price which is available to buy and composite reinforcement can be everywhere, use it every year becomes more and more important, is a full replacement for the traditional bars of steel of different grades. High levels of durability, optimum performance properties, low specific weight and low price – these are the factors that determine the popularity of the use of non-metallic reinforcing elements in all areas of construction.

Fiberglass reinforcement bays made to a diameter of 12 mm and including the length of the valve in the Bay of 100 or 50 meters. Perhaps the production of valves in the size of any length according to customer requirements. Reinforcement of more than 12 mm diameter rods made long agreed with the customer. Ideally, without any restrictions, it is a fiberglass reinforcement for the foundation and the reinforcement of floor slabs, walls, together with the classic valve or separately.

Description

Fiberglass fittings from the manufacturer, the description

The fiber reinforcement bars Glass Composite is one of the most popular and modern materials in the world that have received wide popularity in many parts of the world. Such popularity is due to the fact that the glass fiber has many advantages over the metal steel.

The installations of steel bars in construction works require much expense in time and effort due to the weight of the heavy steel.

In addition, it is prone to corrosion, which could eventually lead to premature failure of the concrete structure. In turn, the use of fiberglass rods – lighter and chemical resistance material (immunize the etching of all types) in construction is more profitable

Equivalence between the steel bars and the fiberglass resistance standpoint bars.

Given the very high performance of fiber rods compared to steel you find below the table of equivalence to use in calculating your structures

Comparative characteristics of fiberglass reinforcement

The performance and features like durability, light weight and corrosion resistance of composite rebar is the strengths of the popularity among builders and professionals.

However, many people, who are used to working with in conventional metal steel bars, often skeptical that the glass fiber or basalt fiber can fully replace metal steel. These fears arise because of a lack of information about the capabilities and characteristics of composite materials.

To fill this gap, we will provide a comparative description of the metal and composite connectors for the most necessary construction parameters.

properties*  steel rebar  stainless steel rebar  [email protected]
ultimate tensile strength ftk (N/mm²) 550 550

> 1000

characteristic value tensile strength fyk (N/mm²)  500 500 no yielding
design value tensile strength fyd (N/mm²)  435 435 445
strain at Ultimate Limit State  2.18 ‰ 2.72 ‰ 7.4 ‰
tension modulus of elasticity  200,000 160,000 60,000
design value bond strength fbd ≤ C40/50  acc. EC 2 acc. EC 2 acc. EC 2
design value bond strength fbd > C40/50  acc. EC 2 acc. EC 2 3.7
concrete cover (min.)  acc. EC 2 ds + 10 mm ds + 10 mm
density g (g/cm³)  7.85 7.85 2.2
thermal conductivity (W/mK)  60 15 < 0.5
coefficient of thermal expansion (1/K)  0.8 – 1.2 x 10-5  0.8 – 1.6 x 10-5 0.6 x 10-5 (axial) 2.2 x 10-5 (radial)
specific resistance (μΩcm)  1 – 2 x 10-5  7.2 x 10-5  > 1012
magnetism  yes very little no

Economical

Benefit from 30% at ravnozamene metal reinforcement on composite

Corrosion

100% does not rust. Water-resistant, not subject to corrosion and does not cause destruction of concrete

Without welding

Composite reinforcement knit wire or plastic tightening the fixings

Any length

On request, unlike metal 6 or 12 meters

Durability

Reduces cost of transportation and handling operations, and facilitates the execution of works on the subject

Low weight

Reduces cost of transportation and handling operations, and facilitates the execution of works on the subject

Thermal conductivity

100 times lower than that of steel, which significantly reduces heat los

Heat resistance

From -70 to +200 ° C does not change its operating characteristics

Strength

Composite rebar 2-2.5 times stronger than steel

Dielectric

It does not conduct electric current, electrical

Environmentally friendly

It does not emit harmful and toxic substances. It complies with all European standards. Do not harm nature

Radioprozrachny

It does not create the screen and interfere with radio waves, cellular and wi-fi

The main applications of composite reinforcement

Building (foundation)

Unique features, such as the strength of the non-metallic fittings, made of composite material, are an alternative to fittings of metal.

The most common type is the reinforcement of fiberglass, followed by basalt rebar, both types have been successfully used in the construction.

Basalt and composite rebar used for construction of buildings and structures for various purposes.

read more

Characteristics of fiberglass and basalt fittings, making them suitable for industrial, road, civil engineering, bridges, various piers, docks, which are in use are exposed to aggressive media and corrosion.

Composite valves allows to increase the life of plants by 2-3 times as compared with the metal reinforcement. Through the application of the valve is less than the diameter of the can significantly reduce the cost of construction works, and thanks to the absence of corrosion increases the shelf life of products, there is a reduction or even disappearance of repairs.

Road construction

Asphalt in the CIS countries is the primary building material for road construction.

Asphalt coating wears out quickly, as a result, we are dealing with the occurrence of potholes, coating cracks, pits formation caused by temperature fluctuations, heavy load traffic and partial displacement of soil. …

read more

The low strength of asphalt pavement leads to a decrease in durability and performance.

To solve this problem, you can, by means of the reinforcement of asphalt pavement by means of a fiberglass mesh reinforcement. The problem of occurrence of the pits, potholes and soil displacement, more of us will not be disturbed. Since tensile coating strength becomes much higher, and the horizontal load is distributed over a large surface area.

Composite mesh well established and under the threat of non-standard asphalt pavement deformation due to its strength and corrosion resistance.

Laying composite mesh to create asphalt coating has been used for more than 20 years, all over the world. Threefold increase in the service life of asphalt pavement, provides a significant economic interest of large construction companies.

Reinforcement of foundations of residential and industrial buildings

Marine and coastal structures

Concrete parking

read more

If you face the choice of material for the reinforcement of industrial flooring, you should familiarize yourself with the characteristics of the composite reinforcement. The material is highly demanded and do not unreasonably.

Metal structures – a relic of the past, the composite material has a much more significant number of advantages, allowing to save a considerable amount of time and money.

 The material is able to withstand heavy loads, with a smaller diameter of the rod, fiberglass is impervious to the corrosive environment, are not exposed to the external environment when cracks occur, reliable and durable.

Acquisition of composite reinforcement in the bay, further reducing costs, due to the absence of extra segments. Handling is straightforward, thanks to the compact valve placement.

read more

Composite rebar is no exception when using the material in the construction of offshore structures and embankments.

River and port facilities are often built using reinforced concrete structures, because of their availability. However, since all these structures are located near the water or directly in it, comes into play “humidity” and hence corrosion of metal structures and inevitable destruction of only a matter of time. Furthermore, the design should be floating.

When choosing the material for the reinforcement of fall on a composite reinforcement, the problem disappears. Characteristics of fiberglass, such as lightness and resistance to corrosion, allows you to extend the design service and significantly save on costly repairs in the future.

Pontoons, FRP, last longer, withstand high loads and does not require special care, and the construction itself ensures good buoyancy, by winning by weight.

read more

The construction of parking and parking in most cases, it’s expensive and has a lot of “gotchas.” De-icing agents very aggressive effect on the coating and the concrete is very hygroscopic. After contact with the valve reagents data constitutes “layer” of the rust. Which in turn has a high coefficient of expansion, it “pushes” the concrete reinforcement rods fall freely into the cavity and become loose.

Valves made from fiberglass does not react with aggressive chemicals. What makes a grid of fiberglass – quite promising choice. Despite the heavy workload, fiberglass is better – since their elastic properties, it can be bent. This material has proven itself in the construction of parking lots and parking areas.

The US, Europe and India are already widely used this technology. Savings and time-tested quality leaves no chance metallic counterparts.

Railway sleepers

Agriculture

Bank protection

read more

The last few no fiberglass rebar are actively used in the construction of railway sleepers, platforms and platforms. The material is well established and is in high demand. One of the main advantages of composites – fire resistance. Durability and ease, the ideal ratio for comfortable transportation of the material, the construction of rail enclosures and trays made of fiberglass with ribs, for the outflow of water from the railroad tracks.

 Resistance to corrosion allows using composite rebar for the construction of platforms and sites, in conditions of high humidity and moisture. Using this material, you eliminate repair work from the list of costs, far and long. The set of unique properties of fiberglass, provides the ultimate in durability and structural life of most structures. The market of railway transport is always demanding to reduce the cost, combined with high quality materials.

Turning to the group of companies CBI, you are guaranteed to implement all your wishes and will save a weighty amount of money.

read more

Composite rebar is actively used in agriculture. Use this material is quite comfortable and easy, and the reliability and strength of the product, greatly facilitate your work. Various livestock structures built using composite profiles, will give significant acceleration in the construction, will save you from having to paint and frequent repair designs. The composite is ideal for the production of greenhouses and barns, as compared to similar structures made of metallic materials.

GRP has a low thermal conductivity while retaining a hangar or a greenhouse at the desired temperature in significant savings. In agriculture, not rarely use pultruded profile for building poles and fences. Barns, fences, fences, etc. Design of composite reinforcement, can be made in any color.

read more

From year to year, there is an increase in demand for cottage construction projects, the construction of facilities in the coastal areas. The coastal area dictates the rules at construction sites. The first with what we face – is the erosion of shores. The process of soil erosion of an ongoing process and the everyday, the damage during construction, it is worth considering.

Events on bank protection can help protect the soil from erosion and erosion. In conducting these works, we can not do without fiberglass reinforcement as the standard metal reinforcements will not give the proper result. Their properties vary much. Composite rebar has high corrosion resistance and is not subject to rust. Valves made from fiberglass, quite a budget option.

When on bank protection measures is clearly can be seen, considering the factor that the work is usually carried out on a sufficiently vast area that requires a large amount of building material. In such cases, the purchase of a fiberglass reinforcement CBI the group companies will significantly save the project budget.

Reinforcing walls

Building bridges

The floors in the house

read more

New technologies are gradually conquering the construction market. In particular, this can be said about the reinforcement of the walls and ceilings – an important and responsible process in the construction of facilities. And construction companies increasingly prefer composite materials.

Through the use of a composite reinforcement manages provide structural strength that can withstand high voltage and possible other adverse external factors for a long time.

read more

Deterioration of Bridge Deck – a key issue in the field of bridge construction. Pavement concrete wears significantly faster than any other material, because of the harmful effects of chemical agents used to prevent icing roads, inclement weather and traffic load increasing density of roads. The main problem of such a coating, the formation of cracks in the stack and the subsequent bundle due to corrosion of the material.

To prevent these situations, associated with the destruction of steel reinforcement should be replaced with another material resistant to corrosion. The polymer fittings, repeatedly and very successfully used for the reinforcement of concrete decks and other bridge structures, well-proven.

The use of a composite reinforcement, for reinforcement of the bridge deck, extends floor life and allows you to save a lot of money.

read more

Fittings polymer composite is used in residential, private and industrial construction, construction of industrial buildings and public facilities.

It is used when creating concrete structures, repair work, in the restoration of the brick and concrete surfaces, to perform masonry walls with flexible coupling, in the construction of bulk floors.

Buy composite reinforcement and use it as a cottage construction – cost-effective solution for both individuals and for the construction companies.

Composite rebar in landscape design

Underground Construction

Chemical structures

read more

Composite rebar is not limited to the sphere of construction, this material is used widely in landscape design. In the scenery of the estate land or home designers prefer reinforcement of fiberglass, due to its decorative qualities and variety of forms. Using a plastic reinforcement in the construction of water slides and pools, we can count on the absence of corrosion and rot.

The shape of the valve can be set in the manufacture, how it will look like, it depends only on your imagination. Ordering fiberglass reinforcement directly from the manufacturer Arkoprom, you can embody all the most daring ideas on landscape design of your object.

Decorative slides, waterfalls and blocks for landscaping, you can create a composite reinforcement. Glass can also be used for reinforcement of concrete, decorative designs.

It all depends on your imagination and the unique properties of composite reinforcement will allow to realize the most courageous decisions.

read more

Valves made from fiberglass has become much in demand during the construction of the largest, the world’s subways, located in Europe and Asia.

Under the conditions of absolute humidity and an abundance of constant vibration, the use of composite reinforcement – the most successful option. GRP good job of corrosion and the load, and the appearance of cracks in the concrete, due to vibration, moisture has penetrated inside, do not cause any damage, the design does not lose its load-bearing capacity. The ease and flexibility of fiberglass reinforcement, significantly simplify the work with concrete in cramped conditions underground.

Transportation fittings, manufactured in coils on the 100m. Cut material can be directly on the job site. That in turn allows you to save on transportation of fiberglass reinforcement.

read more

Valves made from fiberglass has a wide range of properties, allowing the use of this material in the construction of chemical plants. Resistance to aggressive agents with a wide gradation of temperatures and pressures, once again confirms the indispensability of the composite in the chemical industry.

Fiberglass reinforcement is ideal for the construction of pipes, tanks, reactors and other types of equipment, working in conditions of corrosion from exposure to hazardous chemicals.

One of the most common ways to use the composite in the chemical industry – creating lining, resistant to corrosion and chemicals. This connection provides the maximum protection of metal and concrete structures.

Metal structures, in turn, can not cope with the task in full fiberglass losing almost all respects. In the construction of facilities of the chemical industry, the error can not be, the use of composite reinforcement, reasonable choice and very beneficial in terms of cost, especially in the long term.

Properties of FRP reinforcement

Fiberglass reinforcement is a product formed from the glass fibers connected to thethermosetting resins. Its main feature – is the ease of mass ratio per unit volume is only2g / mm³. To work with this material much easier and more cost-effective than with metal fittings. It takes much less cost for transportation and directly at the reinforcement.

In addition, thanks to fiberglass is resistant to corrosion, such fittings protects the concrete from premature failure, thus extending the life of the structure service. Fiberglass armature reacts to changes in temperature is similar to concrete, which also favorably affects the strength of a reinforced structure. fiberglass strength as compared with metal – in excess of about three times.

Thus heat conduction rate is 100 times lower than the thermal conductivity of the steel reinforcement component. Therefore, design, GRP, not frozen (do not form “cold joints”) and the building constructed with the use of this material will be warmer than the building in which basis laid metal reinforcements.

This property allows the fiberglass to reduce heating costs, so this material is widely used in the construction of modern energy efficient buildings.

All construction and repair organizations will be interested to know that fiberglass extremely durable material, which allows for 80 years after installation to do without additional repair work. This good composite rebar for the foundation.

Fiberglass fitting found its application in many fields of industry, construction, public utilities:

  • in construction it is used in the construction of residential, public and industrial facilities as a base for the foundation, floors, beams, as well as device seysmoustoichivyh zones;
  • in road repair works fittings used in the regeneration of embankments, roadway, in the construction of bridges and road barriers. It is resistant to anti-icing reagents may therefore be applied in all cold regions.

Fiberglass reinforcement is an ideal basis for concrete and masonry structures. It is used when creating poles for power lines and lighting in the construction of road, sidewalk and fence boards, as well as device sleepers on the tracks.

Fiberglass is applicable in building structures such as the solid foundation and foam. It is also widely used in creating structures that should have a high resistance to chemicals, such as:

  • the construction of storage facilities for chemical waste and components;
  • the regeneration of sewage, water supply, irrigation systems;
  • in the construction of port facilities and the strengthening of the coastlines.

Despite the uniqueness of the product, which is acceptable fiberglass rebar price is affordable, and material for the building organizations, and individuals. Its cost is 40-50% lower than the cost of steel reinforcement, which can significantly reduce costs and thus improve the quality of constructed facilities. In general, composite rebar can be called one of the most reliable and efficient construction materials of our time.

Product form fiberglass reinforcement

This fixture is made of straight strands of glass or basalt fibers (respectively ASP and BPO), which are collected in a bun, impregnated with thermosetting resin binder, otformovyvayutsya, exposed to heat (polymerization) and cooled. The result is a solid rod of high strength, according to test results at 3 times the tensile strength of the steel, and the weight ratio of equal strength in less than 9 times.

The standard is made in the form of rods of any length, on request. With a diameter of 8 mm inclusive can be manufactured in the form of coils (skeins) containing valves 100 meters. Overall dimensions of the bay: height – up to 8 cm in diameter – up to 1 meter.

With a diameter of 10 mm and 12 mm can be manufactured in the form of coils (skeins) have a length of 50 meters. Overall dimensions of the bay: height – up to 5 cm in diameter – up to 1.5 meters.

In agreement with the customer is possible to manufacture the rods and coils of any length. It can be made with a smooth, construction, periodic profile:

  • ASP ABP-periodic profile is used instead of steel reinforcement Class A-III (A-400);
  • TSA-ABP smooth profile is used instead of steel reinforcement Class A-I (A-240).

Composite rebar price which is available to buy and composite reinforcement can be everywhere, use it every year becomes more and more important, is a full replacement for the traditional bars of steel of different grades. High levels of durability, optimum performance properties, low specific weight and low price – these are the factors that determine the popularity of the use of non-metallic reinforcing elements in all areas of construction.

Fiberglass reinforcement bays made to a diameter of 12 mm and including the length of the valve in the Bay of 100 or 50 meters. Perhaps the production of valves in the size of any length according to customer requirements. Reinforcement of more than 12 mm diameter rods made long agreed with the customer. Ideally, without any restrictions, it is a fiberglass reinforcement for the foundation and the reinforcement of floor slabs, walls, together with the classic valve or separately.

Photo

We are always available to help

our managers to make the right choice and will answer your questions

+216 28 167 383

Fiberglass composite rebar prices rise.

Do not wait, buy now!

Our products: