Spacers

Accessory Fixtures, application in Nizhny Novgorod

Apply them to solve several major problems:

  • Creating a protective layer between the reinforcement and formwork. As a result, the metallic elements are hidden, they are not visible on the facade of the buildings;
  • Protection of reinforcement from corrosion on the terminals. This allows you to extend the operational lifetime of facilities;
  • Preventing cracking of the concrete at the contact with the metal.

Thus, latches function as follows:

  • inhibit sagging reinforcement, protect it from damage and prolong the life of the building;
  • thanks retainers creates a protective layer that is thick, which provides standards for each building;
  • protect rebar from corrosion;
  • are resistant to high temperatures;
  • with proper material consumption and low cost do not affect the construction budget.

Catches are made of different shapes and configurations. Depending on the type and location of the installation, there are several basic types:

Star

Used in the construction of vertical structures of concrete, such as columns, beams or walls. It allows you to create a protective layer thickness of 15-50mm between the rods composite reinforcement diameters 4-20mm.

Stool

Used in horizontal monolithic structures to create a protective layer between the fitting diameter of 4-14 mm. The thickness of the layer of protection corresponds to the number holder.

Block

The retainer for use in ceiling constructions. Provides Small (35-50mm) and large (50-60mm), a protective layer is applied to the valve 4-32 mm.

Rack

A device with five ribs used to reinforce vertical planes. Wide range of products allows you to mount the structure of rods with a diameter of 5-12 mm.

Wheel

It is used when creating a horizontal overlap, use a rod to a thickness of 18 mm.

Cone

They are used to protect the fasteners (clamping screws) when installing formwork. These clamps are used with 25mm PVC pipe that is fitted at both ends of these clips.

Support for granular soil

This clip is suitable for fixing into the ground reinforcing mesh consisting of rods with a diameter up to 14mm inclusive. When the retainer is applied to surfaces of rubble, sand and other loose materials.

Triangle

Are used to create a protective layer reinforcement in a horizontal plane during concrete pouring.

Buy armature clamps, mounting clamps, wire knitting

Accessory Fixtures are an important element in the construction. Of course, their main purpose is to protect the structure from mechanical damage, including cracks, contribute to the preservation of the original strength, stability and safety of the protective layer. The use of high-quality clips to speed up the construction process and thus improve the quality of the constructed object. Value for money in the construction project with the use of clamps allows the use of locks everywhere, thereby improving the quality and design, and saving time and labor reserves. You can buy locks “CBI” fittings, which are widely proven in the market of building materials. We are pleased to close your production need for this product. Our experts will help you choose the best clamps for your particular construction project to advise you should contact the Sales Department specialists in any convenient manner.

Catches reinforcement “CBI”

High demand in the construction works are fixers for fittings “Zvezdochka”. This clip allows you to create a protective layer in the formwork during the construction of columns and walls, as well as the filling of the vertical frame. Made of sturdy clamp and high-quality materials and allows you to work with the reinforcement of varying thickness. Catches armature allows to increase the strength of the structure, it helps to get rid of construction defects, promotes better implementation of construction works. Lock fittings chair is a polymeric materials which are designed for industrial production of concrete directions. The main purpose of these clips is to provide a fixed frame of the armature to provide a protective layer. Lock, which price is quite acceptable, make your job easier, resulting in reinforcement frame will find a high degree of accuracy. Lock armature cube incorporates four combined protection layer, which are connected in one piece. The size of each of them is 35 to 60 mm. To increase the convenience created Cube “small” with reduced dimensions and the “big” – with the appropriate dimensions. Protective layers retainer large armature are 50 and 60 mm. This is the most common types of locks, the full range, you can find in the price list. CBI plant manufacturer offers fasteners for fixtures at factory prices from the manufacturer.

Description

Accessory Fixtures, application in Nizhny Novgorod

Apply them to solve several major problems:

  • Creating a protective layer between the reinforcement and formwork. As a result, the metallic elements are hidden, they are not visible on the facade of the buildings;
  • Protection of reinforcement from corrosion on the terminals. This allows you to extend the operational lifetime of facilities;
  • Preventing cracking of the concrete at the contact with the metal.

Thus, latches function as follows:

  • inhibit sagging reinforcement, protect it from damage and prolong the life of the building;
  • thanks retainers creates a protective layer that is thick, which provides standards for each building;
  • protect rebar from corrosion;
  • are resistant to high temperatures;
  • with proper material consumption and low cost do not affect the construction budget.

Catches are made of different shapes and configurations. Depending on the type and location of the installation, there are several basic types:

Star

Used in the construction of vertical structures of concrete, such as columns, beams or walls. It allows you to create a protective layer thickness of 15-50mm between the rods composite reinforcement diameters 4-20mm.

Stool

Used in horizontal monolithic structures to create a protective layer between the fitting diameter of 4-14 mm. The thickness of the layer of protection corresponds to the number holder.

Block

The retainer for use in ceiling constructions. Provides Small (35-50mm) and large (50-60mm), a protective layer is applied to the valve 4-32 mm.

Rack

A device with five ribs used to reinforce vertical planes. Wide range of products allows you to mount the structure of rods with a diameter of 5-12 mm.

Wheel

It is used when creating a horizontal overlap, use a rod to a thickness of 18 mm.

Cone

They are used to protect the fasteners (clamping screws) when installing formwork. These clamps are used with 25mm PVC pipe that is fitted at both ends of these clips.

Support for granular soil

This clip is suitable for fixing into the ground reinforcing mesh consisting of rods with a diameter up to 14mm inclusive. When the retainer is applied to surfaces of rubble, sand and other loose materials.

Triangle

Are used to create a protective layer reinforcement in a horizontal plane during concrete pouring.

Buy armature clamps, mounting clamps, wire knitting

Accessory Fixtures are an important element in the construction. Of course, their main purpose is to protect the structure from mechanical damage, including cracks, contribute to the preservation of the original strength, stability and safety of the protective layer. The use of high-quality clips to speed up the construction process and thus improve the quality of the constructed object. Value for money in the construction project with the use of clamps allows the use of locks everywhere, thereby improving the quality and design, and saving time and labor reserves. You can buy locks “CBI” fittings, which are widely proven in the market of building materials. We are pleased to close your production need for this product. Our experts will help you choose the best clamps for your particular construction project to advise you should contact the Sales Department specialists in any convenient manner.

Catches reinforcement “CBI”

High demand in the construction works are fixers for fittings “Zvezdochka”. This clip allows you to create a protective layer in the formwork during the construction of columns and walls, as well as the filling of the vertical frame. Made of sturdy clamp and high-quality materials and allows you to work with the reinforcement of varying thickness. Catches armature allows to increase the strength of the structure, it helps to get rid of construction defects, promotes better implementation of construction works. Lock fittings chair is a polymeric materials which are designed for industrial production of concrete directions. The main purpose of these clips is to provide a fixed frame of the armature to provide a protective layer. Lock, which price is quite acceptable, make your job easier, resulting in reinforcement frame will find a high degree of accuracy. Lock armature cube incorporates four combined protection layer, which are connected in one piece. The size of each of them is 35 to 60 mm. To increase the convenience created Cube “small” with reduced dimensions and the “big” – with the appropriate dimensions. Protective layers retainer large armature are 50 and 60 mm. This is the most common types of locks, the full range, you can find in the price list. CBI plant manufacturer offers fasteners for fixtures at factory prices from the manufacturer.

Photo

We are always available to help

our managers to make the right choice and will answer your questions

+216 28 167 383

Accessory Fixtures

Prices are rising. Do not wait, buy now!

Our products: